Air Valve Factory Fitting Tools

  • Leafield Marine’s factory fitting tools are used during the manufacturing phase to safely install our air valves
  • Used together with a torque wrench.  This will ensure that the correct tightening torque is applied every time when installing the valve.
  • Avoid damaging the valve during tightening
  • See our installation and service instructions for further information

Product Description

Leafield Marine supply all the tools required for safe and secure fitting of our air valves.

Our factory fitting tools are used during the installation and adjustment of our valves.

Please note, unlike with our tool kit spanner, a different version of the tool is required for each type of valve.

Accessories and Service Tools

service tools

D7/C7 Factory Fitting Tools - 0710002

  • Used together with a torque wrench. This will ensure that the correct tightening torque is applied every time when installing the valve.
  • Avoids damaging the valve during tightening
  • Please refer to D7 Installation and Service Instructions

service tools

A6 Factory Fitting Tools – TMC1040

  • Used together with a torque spanner. This will ensure that the correct tightening torque is applied every time when installing the valve.
  • Avoids damaging the valve during tightening.
  • Please refer to Installation Sheet – 15439

service tools

A9 Factory Fitting Tools Set - TM3120

  • Used together with a torque wrench. This will ensure that the correct tightening torque is applied every time when installing the valve.
  • Avoids damaging the valve during tightening.
  • Please refer to A9 Installation Sheet.

service tools

B10 Factory Fitting Tool - TM2582

  • Used together with a torque wrench. This will ensure that the correct tightening torque is applied every time when installing the valve.
  • Avoids damaging the valve during tightening.