Snap Fit Connector Assembly

  • Allows connection of separate inflatable chambers or tubes.
  • Allows high flow between chambers.
  • Maintenance free.
  • Robust and leak tight.
  • Clamps into fabric.

Product Description

The Snap Fit Connector allows connections to be made between separate chambers, for example, on tents or boats and other modular constructions. It provides a high flow with clear 24mm diameter bore between chambers.  It is suitable for use with a wide range of fabrics.

There are two different versions of these connectors: one which locks together permanently on assembly or one which can be disconnected if necessary.

Additionally, a pressure relief or non-return valve can be built into the assembly: see Non-Return Valve Snap Fit Connector Brochure or please contact us for further information.

Accessories are available to blank off chamber connections or to allow separate chambers to be inflated before they are linked.

Accessories and Service Tools

service tools

Snap Fit Pressure Relief/Non-Return Valve

  • Allows pressure relief/non-return function to be added to the Snap Fit Assembly.

service tools

Snap Fit Connector Factory Fitting Tool – 0901004

  • B10 Factory Spanner 
  • Used together with a torque wrench.  This will ensure that the correct tightening torque is applied every time when installing the valve.
  • Avoids damaging the valve during tightening.

service tools

Snap Fit Connector Blanking Plug

  • Allows the Snap Fit Connector Assembly to be sealed when disconnected from another chamber.
  • Can be easily removed to allow reconnection.